Ask Dr. Z

Ask Dr. Z Knowledge Base houses over 7,500 coding questions and answers dating back to 2013.

Ask Dr. Z Disclaimer

Please note this question was answered in 2020. The coding advice may or may not be outdated.

RVAD - Right Ventricular Assist Device

Date: Oct 2, 2020

Question:

My providers are performing percutaneous RVADs utilizing the ProTek Duo. Would we utilize the LVAD codes, as the descriptor DOES NOT indicate left ventricle or use an unlisted code? The procedure note is as follows: "The existing PA catheter was removed. A new 0.035" PA catheter was advanced to the right PA. The 0.035 PA catheter was exchanged for a Lundequist wire. The existing sheath was removed, and the venotomy was dilated up to a 26 French dilator. Anticoagulation was initiated. The 29 French Protek Duo cannula was advanced to the main PA, and this cannula was clamped. The inflow and outflow were then attached to the TandemLife RVAD system via wet-wet connections. Once the system was confirmed to be free of air, the clamps were removed and RVAD was initiated at 3 L/min."

Sign up for a membership to view the answer to this question.

Need to ask Dr.Z?

Don't see the answer you're looking for in the knowledge base? No problem. You can ask Dr. Z directly!
Ask Dr. Z a question now!